Preparation for the generator farm generator before starting

Preparation for the start of the generator of the farmer's ship:

1. The operator of the equipment room should abide by the safe operating procedures, wear overalls and insulated shoes, and the crew should have a clear division of labor;

2. Check if the anti-railway cover of the flywheel and generator is in good condition;

3. Check each gearbox, clutch, governor, oil level, fasteners, etc., and confirm that the oil and water temperature is not lower than 20 degrees before starting;

4. Set the pipeline gates of each system in the “working” position;

5. Check the link bolts of the transmission mechanism and fasten them;

6. Whether the clutch handle pressure is normal and whether the overspeed safety device is positioned;

7. Check if the pressure of the gas cylinder is normal and whether the overspeed safety device is positioned;

8. Open the blowdown valve of the air pump;

9. Check whether the circulating water pump, oil pump and fuel pump are normal;

10. Place the excitation resistor at the maximum resistance position and disconnect the power switch.